Belts

Extremely long-lasting loads and the longest possible service life are the focus in the development of AQUA PULL S. The patented weave structure ensures the necessary flexibility for operation in a corrugated board system. The high mass per unit area guarantees high stiffness and uniform distribution of the contact pressure in different load systems. This, in turn, guarantees correct gluing and fast drying of the board. The combination of high-quality PES-fibres enables the belt to shed the moisture absorbed during the drying process very rapidly. 

AQUA PULL S features

• Suitable for all corrugated board machines
• Long service life
• Patented clamping - no stresses on the board
• Suitable as a top and bottom belt

 The loads on the edges of the corrugator belt are extremely high in corrugator systems with high production speeds, flat-surface pressure systems and frequent changes of paper width. Up to 40% higher temperature and increased wear due to the belt running over heating plates and shoes, are not uncommon. In order to cope with this additional wear, a belt surface reinforcement was developed for the AQUA PULL AE consisting of a protective layer of firmly woven-in aramid fibres.

The woven-in reinforcement is an integral part of the belt and does not adversely affect either the running characteristics or the moisture regulating properties of the belt.

The width of the edge reinforcement is variable. It can be adjusted flexibly to meet the specific needs of the corrugating system.

AQUA PULL AE features

• Suitable for all corrugated board machines
• Woven-in edge reinforcement ensures extra long service life
• Can be used as a top belt
• Patented weave

AQUA ULTRA was developed to produce flat boards on high-speed corrugating machines. The open structure of Aqua Ultra facilitates steam evaporation from the board. The 2-layer belt absorbs moisture extremely well, keeps the moisture content of the board even and ensures a good flat result in the micro-flute area in particular. The rapid drying of the board enables a significant increase in production speeds.

AQUA ULTRA is a consistent development based on the proven AQUA PULL belt range. Optimum paper synchronisation, excellent horizontal stiffness, and edge and directional stability characterise the AQUA ULTRA. Not forgetting: the good energy absorption reduces the energy requirement. Belt wear is minimal.

AQUA ULTRA features

• Suitable for all corrugated board machines
• Specially developed for high-speed machines
• Very high moisture absorption and release
• Patented open weave structure
• Can be used as a top belt
• Extremely long service life thanks to woven-in edge reinforcement

 The AQUA ULTRA AE corrugator belt is ideal for corrugating systems with high production speeds, even load systems and frequently changing paper widths. The woven-in edge reinforcement of aramid fibres reduces wear substantially and ensures a long service life.

AQUA ULTRA AE features

• Particularly suitable as a top belt
• Highest production speed and demands
• Corresponds to latest corrugating technology

The AQUA RUN corrugator belt is based on the AQUA ULTRA web structure and combines the outstanding qualities of the AQUA ULTRA product range with the advantages of a 3-layer belt structure. AQUA RUN is ideally suited to the production of particularly fine boards.

AQUA RUN features

• Particularly suitable as a top belt
• Highest production speed and demands
• Corresponds to latest corrugating technology
• Particularly suited to finest corrugation

The AQUA RUN AE corrugator belt is based on the AQUA ULTRA web structure and combines the outstanding qualities of the AQUA ULTRA product range with the advantages of a 3-layer belt structure. AQUA RUN AE is ideally suited to the production of particularly fine boards. Its special feature: the woven-in edge reinforcement of aramid fibres. It substantially reduces wear and increases service life.

AQUA RUN AE features

• Particularly suitable as a top belt
• Highest production speed and demands
• Corresponds to latest corrugating technology
• Particularly suited to finest corrugation
• Edge reinforcement substantially reduces wear 

 MAX PULL S belts ensure totally secure board transport for all systems. MAX PULL S makes contact after the heating plates and achieves the necessary tractive force for accelerations with clearly reduced contact surfaces. More than three tonnes of tractive force are achieved.

The proven AQUA PULL S belt is the basis for the MAX PULL S. A much higher grip is achieved thanks to a special coating on the paper side. The reliable abrasion and high temperature-resistant special silicone coating ensures smooth operation at the highest production speeds.

MAX PULL S features

• For all corrugating systems
• Bottom belt for the most extreme demands
• Use for heavy board

The MAX PULL Antistatic is equipped with a corrugated surface structure, which is coated with silicon rubber. The belt sucks the silicon up to a depth of 1 mm and fills the troughs. The peak is just moistened. The advantage is obvious: it produces an air and moisture-permeable surface. Electro conductive yarns are woven into the inner section of MAX PULL Antistatic, which ensure good conduction of electrostatic loads with the moisture and breathability of the belt. The air permeability avoids the sticking and sucking effect.

MAX PULL Antistatic features

• Specially developed silicon coating
• Additional function prevents static loading
• Use for heavy board
• Bottom belt for the most extreme demands